ZS series brass direct lifting diaphragm solenoid valve 2/2 way normally closed type

Features: 2/2 way direct lifting diaphragm
0-10bar
Flow channel 15-50mm
Detachable repair
Sealing material: NBR rubber - EPDM rubber - fluoro rubber -specific material
Suitable for water, air, water vapor, light oil, natural gas, etc.
Provide IP65 three-pole connector in accordance with UNI ISO 4400 (DIN 43650A) / lead connection / explosion-proof coil

  • General characteristics
    Body materialBrass
    Sealing materialNBREPDMVITON
    Temperature80℃140℃150℃
    Insulation gradeH
    Voltage 220-230VAC 50-60Hz 100-120VAC 60Hz 12- 24DC
    Power15-28VA15-28VA11-20W
    Ambient temperature -10℃-80℃
    InstallationInstalled according to the flow direction of the valve body, to improve the life and reliability, install it horizontal upward is best
    ConnectionThe standard is G, and the thread requirements such as NPT can be selected.
    Voltage fluctuation±10%
    Can be equipped with coil B41/B51


    Specification sheet (internal thread interface)
    Connection methodFlow aperturemmKVvaluem³/hPressure difference(BAR)DimensionsLength x width x heightModel(voltage is 220v)X=N or E or VWeightKg
    Minimum pressureMaximum working pressure
    Air, gasWater, LiquidLight oil
    ACDCACDCACDC
    3/8"152.401071077470x56x100ZS- 15 - 31 X0.85
    1/2"152.401071077470x56x101ZS- 15 - 41 X0.8
    3/4"206.301071077468x57x107ZS- 20 - 51 X1.1
    1"258.301071077498x76x115ZS- 25 - 61 X1.45
    1 1/4"3219.4010710774112x86.5x150ZS- 32 - 71 X2.3
    1 1/2"4022.4010710774123x94x160ZS- 40 - 81 X2.9
    2"5034.8010710774165x123x176ZS- 50 - 91 X4.8



  • 20191025101356417.JPG

    20191025101404296.JPG


Recommend for you

MESSAGES

Previous: No content